Mold in a furnace, duct system or swamp cooler almost always traces to a wet component: a stuck humidifier, a plugged coil drain, a cooler reservoir that never dried, or a damp basement around the ducts. A local company checks the water source before it cleans anything. Call the number on this page to be connected with a local mold company in Dupont.

Condensation you can spot
Sweating on a cold duct, dripping from a coil cabinet or a rust ring below the air handler means moisture is escaping where it should not. Wet insulation wrap on metal or flex duct can hold water for weeks, and mold grows on that paper and fiber easily.
Leaky return ducts
A return pulling air from a damp crawl or unfinished basement can drag moisture and spores into the system. Gaps near the floor, open stud-bay returns in older houses and poorly sealed joints let basement air ride straight into the blower and out to every room. Those gaps are easy to miss.
Out on the plains, service calls can mean long drives, so seasonal cooler cleaning and a quick look at drains each spring is worth doing before the first hot week.

Other trades on the bill
Mold work on a system sometimes overlaps with other work, like drywall around a furnace closet, insulation replacement or an HVAC contractor swapping a coil. Separate trades can mean separate quotes, so ask who handles each part and who coordinates. Ask who coordinates the schedule between them.
Local details for Dupont
Since there's no state mold license in Colorado, compare companies on their written scope, how they set up containment and whether they hold the local contractor license your jurisdiction asks for.
Remediation itself is cleanup, but putting the room back together can be permitted work; ask the contractor whether the Adams County Building Safety Division needs to be involved.
Renting? Colorado's warranty of habitability counts mold associated with dampness as a condition a landlord must fix after written notice; Colorado Legal Services says action should start within 24 hours for urgent problems.
Companies that take calls here usually also work in Thornton, Henderson and Commerce City.
What the visit usually involves
A company looks at the air handler, the coil, the pans and drains, the humidifier, accessible duct runs and the surrounding basement. It may use a moisture meter and a camera. Expect questions about when the smell appears and when service was last done. Take notes during the walk.
Seasonal swamp cooler care
Drain the reservoir in autumn, let the cabinet dry completely, and cover or close the unit. In spring, replace worn pads and flush the sump before starting. A few simple chores a year keep a cooler from becoming a mildew factory. Simple, and it pays off.
Furnace, Duct & Swamp Cooler Mold questions in Dupont
How do I know the smell is from my swamp cooler?
Do I need mold testing for my ducts?
Who fixes the humidifier or coil, a mold company or an HVAC contractor?
What humidity level should I aim for with a humidifier?
More mold services in Dupont
Furnace, Duct & Swamp Cooler Mold nearby
Helpful guides
Sources
Last updated: