Mold remediation referrals for Denver & nearby townsCall: (720) 818-9506
(720) 818-9506

How much does mold remediation cost in Denver?

moldremediationdenverco.net

Published Denver figures put overall mold remediation at roughly $1,109 to $3,112 per project, but the spread by job type is wide. This guide lays out the ranges, names where each one comes from, and explains why your own quote may land outside them.

Need mold help now?
Call now to be connected with a local mold remediation company in Denver.
(720) 818-9506

Published Denver figures put overall mold remediation at roughly $1,109 to $3,112 per project, but the spread by job type is wide. This guide lays out the ranges, names where each one comes from, and explains why your own quote may land outside them.

Quick cost estimator

Typical ranges from the sources cited below, not a quote. The company you hire will price the actual job.

The short answer

Mold remediation in Denver has no single price. A Denver cost guide from Angi lists overall remediation at about $1,109 to $3,112 per project. A separate Denver guide from HomeBlue puts larger work at about $10 to $21 per square foot, or $5,200 to $10,300 for a 500-square-foot area. Both can be accurate for different jobs, because a small patch behind a toilet and a wet, moldy basement wall are different projects.

Treat every number on this page as a published range, not a quote. Nobody can price your job without seeing it, and this site cannot price it at all. We are a referral service: you call, and you are connected with an independent local mold company that can look at the problem and give you its own figure. If you are ready for that step,

Call now to be connected with a local mold remediation company in Denver.
(720) 818-9506

Denver ranges by job type

The Angi Denver guide breaks the work out by where the mold is. These are the ranges it publishes per project:

JobPublished Denver range
Mold remediation overall$1,109 to $3,112
Basement mold remediation$500 to $3,500
Attic mold remediation$1,000 to $4,000
Crawl space mold remediation$500 to $2,600
HVAC and duct mold cleaning$3,000 to $10,000
Mold in walls$1,000 to $20,000
Drywall repair after mold removal$1,000 to $2,900

Two things stand out. First, the ranges overlap heavily, so a basement can cost less than a crawl space or more than an attic. Second, the wall and duct figures have enormous upper ends. Those numbers reflect how much of the building has to be opened up, not how bad the mold looks from the outside.

Per square foot versus per project

Angi lists Denver remediation at $10 to $25 per square foot. HomeBlue lists $10 to $21 per square foot in Denver. Where a company prices by area, the question that matters is which area: the surface with visible growth, or the whole affected zone including materials that have to be removed and the space that has to be contained. Ask a company to say in writing what square footage it is using.

The 500-square-foot figure from HomeBlue, $5,200 to $10,300, is a useful sanity check for a larger job. It is not a typical case. Many projects in a Denver home are a single room, a section of basement wall or a ceiling below a leak.

What an inspection adds

If you want someone to find out where the moisture is coming from and how far the mold has spread before you commit to work, that is an inspection, and it is a separate line item. The Angi Denver guide lists a typical home mold inspection at $300 to $1,075. HomeGuide, using national figures rather than Denver ones, lists $300 to $650 for the same service and $100 to $300 per test for mold air sampling.

Whether you need sampling at all is worth asking about. EPA states that in most cases, if visible mold growth is present, sampling is unnecessary, and that no EPA or other federal limits have been set for mold or mold spores. Our guide on what an inspection and a test each tell you covers when sampling earns its cost.

What pushes a Denver quote up

Published ranges are averages across many jobs. These are the usual reasons an actual quote runs higher:

  • Size of the affected area. More surface means more labor and more material to bag and remove.
  • Material type. Porous materials such as drywall, insulation and carpet are generally removed and replaced rather than cleaned. Wood framing and concrete can often be cleaned in place.
  • Access. Tight crawl spaces, finished basements with built-in cabinetry, and attics with low rafters all slow the work.
  • Containment. Sealing off the work area and running air filtration adds setup, but it is how a careful company keeps spores from spreading to clean rooms.
  • Ductwork. When mold reaches a forced-air system, the work moves from one room to the whole house, which is why the duct range sits so far above the others.
  • Rebuild. Remediation removes damaged material. Putting drywall, paint and trim back is often a separate price, which is why the drywall repair range above is listed on its own.

The cost that matters most: the water source

Mold needs moisture, and Denver is not a damp city. Metro Denver Economic Development, citing NOAA, lists average annual precipitation at 15.6 inches and average afternoon humidity at 43 percent. With air that dry, indoor mold in this area usually points to a specific water problem: a slow plumbing leak, a failed water heater, a washer hose, a roof leak after heavy snow, a window well that drains toward the foundation, or a humidifier or evaporative cooler running unchecked.

Cleaning mold without fixing the source is the most expensive mistake on the list, because the growth comes back and you pay twice. When you compare quotes, ask each company what it thinks caused the moisture and who is expected to fix it. A mold company and a plumber or roofer are different trades. Our guide to the first 48 hours after a burst pipe or leak explains what to do while the material is still wet and the damage is still small.

When a smaller bill is realistic

EPA describes areas of less than about 10 square feet, roughly a 3 ft. by 3 ft. patch, as ones many people can handle themselves, and points to its remediation guidance for larger areas or significant water damage. If you are looking at a small patch on a bathroom wall, a professional may not be necessary. Our guide to the 10-square-foot rule and doing it yourself explains the limits of that advice, including the situations where you should not do it yourself even though the patch is small. If you have health concerns, talk with your doctor before cleaning anything. The CDC states that exposure to damp, moldy environments may cause a variety of health effects, or none at all, and that people with asthma or mold allergies may have severe reactions.

Reading a quote line by line

A usable quote is itemized. Look for these pieces, and ask about any that are missing:

  1. The location and approximate size of the work area, in square feet.
  2. Whether containment and air filtration are included.
  3. What materials will be removed, and who disposes of them.
  4. Whether cleaning of remaining surfaces is included, and how.
  5. Whether rebuild work such as drywall, insulation, paint and trim is included or priced separately.
  6. Whether the company recommends clearance testing afterward, and who pays for it.
  7. What the company says about the moisture source and what it will not fix.

Ask for the same breakdown from each company so the numbers can be compared. A low total with no scope is not a bargain, it is a missing scope. If a figure is far below the published ranges above, ask what has been left out. If it is far above, ask what the company expects to find that others did not.

Clearance testing and why it is its own cost

After remediation, some people want proof that the work area is back to normal conditions. That is clearance testing, and it is normally priced separately from the cleanup. It is more often worth it after large jobs, jobs in homes with someone who has asthma or allergies, or when a rental dispute makes an independent record useful. Our guide to post-remediation clearance testing covers when to ask for it. Because the person testing should not be the same person who did the cleanup, a company that offers both is worth asking how it keeps them separate.

Check the contractor, not just the price

Colorado does not require a state mold remediation license, so there is no state mold license to look up. That makes the local check more important. The City and County of Denver issues its own contractor licenses and certificates and states that it does not accept or reciprocate those from other counties or states, and Denver Community Planning and Development issues building permits. If your project includes rebuilding walls, ask who pulls any permit that applies and whether the company holds the local contractor license for the city where your home sits. Our guide on Colorado mold rules and what to check before you hire walks through the questions in order.

Renting? The cost question is different

If you rent, you may not be the one paying. Colorado's warranty of habitability statute allows a residential premises to be treated as uninhabitable where there is mold associated with dampness, subject to exclusions for minor surface mold in places that collect moisture as part of normal use. Colorado Legal Services says a landlord is not required to make repairs until told about the problem in writing. Our guide for tenants and landlords dealing with mold explains the written-notice step.

Ways to keep the price down without cutting corners

  • Stop the water first. Shutting off a supply line or moving belongings out of a wet area costs nothing and limits the spread.
  • Get at least two itemized quotes for anything above a small patch, and compare scope before price.
  • Photograph the damage and the moisture source before anything is touched.
  • Ask what can be cleaned and what must be removed. A company should be able to explain the difference for your materials.
  • Keep indoor humidity in the range EPA recommends, below 60 percent and ideally between 30 and 50 percent, once the work is done.

Where to go from here

Match your situation to a service page for a closer look: mold removal and remediation in Denver for the general process, basement mold removal if the damp is below grade, or a mold inspection if you are not yet sure what you have. To see which nearby towns are covered, browse the service area list. All of these are independent local companies reached through one call to the number on this page, and the price is set by the company that does the work, after it sees your home.

Frequently asked questions

What is the average cost of mold remediation in Denver?
A Denver cost guide from Angi lists overall remediation at about $1,109 to $3,112 per project. HomeBlue lists $10 to $21 per square foot in Denver, and $5,200 to $10,300 for a 500-square-foot area. Your own quote depends on size, materials and access.
How much does a mold inspection cost in Denver?
Angi's Denver guide lists $300 to $1,075 for a typical home. HomeGuide's national figures are $300 to $650, with air sampling at $100 to $300 per test.
Why is mold in walls or ductwork so much more expensive?
Published Denver ranges for walls reach $20,000 and for HVAC and duct mold cleaning reach $10,000. The reason is scope: walls may need to be opened and rebuilt, and ducts connect to every room.
Does this site set the price?
No. This is a free referral service, not a mold company. Prices come from the independent local company that inspects your home and quotes the work.
Call now to be connected with a local mold remediation company in Denver.
(720) 818-9506

Last updated:

☎ Call (720) 818-9506